MAKS 1300 CONDENSATE TREATMENT
GENERAL DESCRIPTION
MAKS 1300 is an aqueous blend of the neutralizing amines.
PRINCIPLE USES
MAKS 1300 is a neutralizing corrosion inhibitor designed for use in steam and complex condensate systems. MAKS 1300 can be used at steam pressures up to 160 bars and temperatures up to 4790C.
REMARK: MAKS 1300 is in compliance with FDA regulations pertaining to boiler water additives. Maximum dosage in plants subject to FDA regulation does not to exceed 45 ppm in the steam. MAKS 1300 must not be used where the steam produced will contact milk or milk products.
PRODUCT BENEFITS
➢ Neutralizes acid-forming gases like CO2
➢ Provides corrosion protection in initial, middle and extended areas of condensate systems.
➢ Reduces condensate system maintenance cost.
➢ Minimizes boiler tube failures caused by corrosion product in returned condensate.
➢ Can be used at pressures up to 40 bars.
DOSAGE
The specific dosage of MAKS 1300 varies depending on return condensate rate, make-up water quality and CO2-content in the steam. MAKS 1300 should be fed to maintain a pH of 8.5 to 9.0 throughout the condensate system.
Your BIMAKS representative will recommend the optimum dosage necessary to ensure maximum program performance according to your specific system parameters.
Recommended dosing point for MAKS 1300 is steam header.
Please refer to the product bulletin for detailed information.
