Исследования и разработки

Area Calculation (Metric)

Enter lengths of area to calculate:

Temperature Converter

Enter Fahrenheit or Celsius to convert each other

Length Converter

Enter imperial or metric unit to convert:

Water Hardness Converter

Enter ppm CaCO3, dH° (German Hardness), fH° (French Hardness) values to convert each other;

lbs to kg / kg to lbs

convert pound [lbs] to kilogram [kg]

Enter lbs or kg to convert each other;
1 lbs = 0.45359237 kg
1 kg = 2.2046226218 lbs

PSI to bar / bar to PSI

pounds per square inch and bar are two popular pressure units.

Enter PSI or bar to convert each other;
1 psi = 0.0689475729 bar
1 bar = 14.503773773 psi

Corrosion Rate Converter

Enter MPY or MMY to convert each other.

MPY - Mil per year

MMY - Millimeter per year

Volume Converter

Enter values to convert each other

Permeate Flow Calculation

Enter your raw or feed water flow and recovery rate and calculate hourly permeate production:

Recovery Rate Calculation

If we know feed water flow and permeate flow rate, we could calculate recovery rate and reject flow rate:

Reject TDS Calculation

TDS balance also could be calculated based on inlet TDS, salt passage, recovery rate and flows.

Evaporation Calculation

Enter your cooling tower performance values and calculate sufficient parameters.

 
 
Half Life Calculation

Half life value is very important while selecting the right biocide program.

Boiler Calculations

Enter your boiler performance values and calculate sufficient parameters.

Boiler Limits

In a low pressure boiler systems the conductivity limits varies 7000-10000 microS/cm based on country legislations.

In this example, the maximum chloride limit is calculated according to the COC.

Cooling Tower Dosage Calculations

Enter your cooling performance values and calculate sufficient parameters.

Continuous dosage (inhibitors)  

Biocide dosage (intermittent)

Geothermal Dosage Checks

Travelling Time

Travelling time check is crucial for the following product stability inside the capillary tube. For the phosphonates TT < 120 min 

Geothermal Dosage Checks

Measuring Cylinder Method 

Keeping time and observing suction of pump via measuring cylinder.